Standarts and Quality, 2024, March

Alena MAKIEVA

TECHNICAL REGULATION AT A NEW STAGE OF DEVELOPMENT: BRAINSTORMING

The article presents ways to improve the technical regulation and standardization system, which were discussed at the forum “Strategic Directions for the Development of Technical Regulation and Standardization”, held within the framework of the Russian Business Week.

Keywords: technical regulation, Russian Business Week, Russian Union of Industrialists and Entrepreneurs, RSPP, standardization, state control and supervision, certification

Evgeniy SOROKIN

THE HISTORY OF REGULATORY SUPPORT OF STANDARDIZATION METHODOLOGY. PART 2

The author continues to outline the history of the formation and development of regulatory support for the standardization methodology in our country based on the analysis of the fundamental standards that have appeared over the past 55 years.

Keywords: standardization, methodology, regulatory support, standards, state standardization system

Victor NETES, Vladimir SHPER

ABOUT NEW RUSSIAN TERMINOLOGICAL STANDARDS FOR DEPENDABILITY. PART 2

The authors analyze GOST R 27.101-2021 “Dependability in technics. Dependability of task performance and business continuity management. Terms and definitions” and GOST R 27.102-2021 “Dependability in technics. Dependability of item. Terms and definitions”, examine new terms, identify inconsistencies in standards, and propose measures to update dependability terminology.

Keywords: reliability, terms and definitions, standardization, readiness, recoverability.

Anastasia MOROZ

NORMOCONTROL OF DRAFT STANDARDS: WAYS TO SOLVE THE PROBLEM

The author discusses the problem of draft standards normocontrol and the documents with which Rosstandart tries to solve it, as well as suggests other ways out using standardization tools

Keywords: normocontrol, standard, draft standard, expertise.

Tatiana SPIRINA

ON THE PROCEDURE FOR DEVELOPING CODES OF RULES

The author considers the problems of methodological support for the development of codes of rules and suggests ways to solve them.

Keywords: codes of rules, development, approval, amendment, cancellation, regulatory legal act

Svetlana DMITRIEVA, Oleg KUBISHIN, Viktoria KERIMOVA

DATA ARCHITECTURE AND FORMATS IN SMART STANDARDS: INTRODUCTION

Experts of Kodeks Consortium consider the content features and target audience of the first edition of PNST “SMART standards. Data architecture and formats”, the draft of which is now being prepared for public discussion.

Keywords: standardization, SMART standard, SMART format, SMART service, preliminary national standard, data architecture, data formats, object model, transport format, Kodeks Consortium, PTC 711.

Yuriy KARNAUSHKIN

ALL PRODUCTS UNDER THE STATE DEFENSE ORDER WILL BE CATALOGUED

The author provides information on changes in federal legislation on the state defense order presupposing the creation of a federal product cataloguing system, and also reveals the main terms in this sphere.

Keywords: product cataloging, state defense order, federal catalogue of products for federal needs, federal nomenclature number.

Viktor BELOBRAGIN, Yuriy BUDKIN, Tatiana ZVORYKINA

TRAINING, EDUCATION, SCIENCE. “STANDARDIZER OF THE YEAR - 2023”: RESULTS

The article presents the achievements of laureates and diploma winners of the “Standardizer of the Year - 2023” competition in the nominations “For contribution to educational and training activities in the field of standardization and related disciplines” and “For contribution to the development of scientific and methodological foundations of standardization”, as well as the special nomination “For prominent contribution to the development of national standardization”, and summs up the overall results of the competition

Keywords: “Standardizer of the Year” competition, nominations, laureates, diploma winners, standardization, education, training

Mikhail LIVSHITS

PROBLEMS OF NATIONAL AND INTERSTATE STANDARDS HARMONIZATION: EXAMPLE OF GOST R 55025-2012 AND GOST 34834-2022

The publication shows an example of harmonization of GOST R 55025-2012 and GOST 34834-2022 requirements, and the need to ensure the continuityof testing laboratories activities in the Russian Federation

Keywords: interstate standards, harmonization, electric power cables, certificate of conformity.

Alena MAKIEVA

SAFE QUEST ACCORDING TO THE NATIONAL STANDARD

The new national standard GOST R 71161-2023 “Services in the field of entertainment and recreation for children. Quest rooms for children. General requirements”, which establishes safety requirements for the organization of children’s leisure activities in the quest format, was enacted on March 1, 2024.

Keywords: quest, national standard, safety, children’s recreation, quest rooms.

Petr SHELISH

PUT IN A WORD FOR CONSUMER…

The author discusses how consumer protection is implemented in our country, points out the factors influencing consumer activity, and concludes that it is necessary to improve consumer protection legislation.

Keywords: consumer protection, standardization, safety, quality

Larisa SKRIPKO

FUNDAMENTALS OF PSYCHOSOCIAL RISK AND WELL-BEING MANAGEMENT

The author examines the basic requirements for maintaining the psychological health of employees established in international standards, and the possibilities of their implementation by Russian companies

Keywords: psychosocial risks, well-being, industrial safety, health protection, efficiency, safe environment

Aleksandr BOBKOV, Andrey SLAVYANOV

AUTOMATED TOOL SUPPORT SYSTEM OF THE ENTERPRISE

The authors present approaches to organizing enterprise’s tool economy based on widespread use of automation facilities, which can significantly speed up the production cycle, keep constant tool accounting, track its movement within the enterprise, reduce the costs incurred in the process of providing production with technological tools and equipment.

Keywords: mechanical engineering, technological tools and equipment, product quality, automated enterprise management system, organization of tool economy.

Ilya KUZMINSKY

UNIFIED CODIFIER OF SUPPLIES FOR FEDERAL STATE NEEDS EC 001-2023

The article provides an overview of the most fundamental changes made during the development of a new Unified Codifier of Supplies for Federal State Needs EC 001-2023

Keywords: Unified Codifier of Supplies for Federal State Needs, cataloguing.

Ilya MULENKO, Oleg PUCHKA, Vladislav RYABKO

THE PROCESS APPROACH AT OIL BASES AND ITS IMPACT ON RAW MATERIAL QUALITY

The article highlights the direct impact of business processes at oil bases on the quality of petroleum products in accordance with GOST R ISO 9001-2015 and GOST R ISO 14001-2016.

Keywords: GOST, quality management system, reservoir, control parameters, Pareto diagram, process approach.

Aleksey ANDREEV, Andrey SMOLYAKOV

QUALITY MANAGEMENT EXPERIENCE IN HIGH-TECH INDUSTRY

Authors share the experience in quality management at Perm Scientific- Industrial Instrument Making Company, a manufacturer of navigation systems for various vehicles. Procedures, methods and tools of the Quality Management System focused on the products quality improvement and competitiveness are considered.

Keywords: quality management, quality management system, instrument engineering, production of navigation systems, Perm Scientific- Industrial Instrument Making Company, Quality Lottery.

Anna MELNIKOVA, Ilya DEMIN, Frina PANTELEEVA

STAFF MOTIVATION SYSTEM: NON-STANDARD QUALITY IMPROVEMENT TOOLS

The authors present the staff motivation tools used in Perm Scientific-Industrial Instrument Making Company, which contribute to improving the product quality and enterprise management.

Keywords: Perm Scientific-Industrial Instrument Making Company, motivation, quality lottery, quality, quality promotions

Oleg MARTSINKOVSKIY, Vladimir TSYBULSKIY, Olga SNOPKOVSKAYA

DEVELOPMENT OF APPROACHES TO CONTROL ODOURS IN THE ATMOSPHERIC AIR

The authors present the current state of regulation and control of pollutant emissions in Russia and show the advantages of using the olfactometry method for odours investigation to respond to public complaints about the quality of atmospheric air.

Keywords: environmental control, atmospheric air quality, public complaints, pollutants, odours, emissions of harmful substances, favorable environment, safety, comfort, quality of life, olfactometry method.

Vladimir KOZLOVSKIY, Dmitriy BLAGOVESHCHENSKIY, Natalia ANTONOVA, Anna KLENTAK

THE AUTOMOBILE MANUFACTURING COMPANY’S BRAND IMAGE FROM THE VIEWPOINT OF PRODUCT QUALITY

The authors propose a set of tools for system management of competitiveness and image of an automotive brand considering the product quality.

Keywords: product quality, competitiveness, automotive industry, brand image, quality assessment, customer satisfaction

Denis SERDECHNYY

ASSESSING THE INNOVATIVE POTENTIAL OF A MANUFACTURING ENTERPRISE

The article considers approaches to assessing the innovative readiness of enterprises, the peculiarities of scientific rents formation in current conditions. A methodology developed by the author to evaluate the innovative potential of an enterprise based on a decision-making support system using a fuzzy logic tool is presented.

Keywords: scientific rent, innovative potential, technological maturity, intelligent system, support for expert decision-making.