Nikolay FAYZRAKHMANOV, Maksim LOMONOSOV

STANDARDS AS THE BASIS FOR ELECTROMAGNETIC SAFETY: PART 1

Abstract. The authors present an overview and a brief analysis of scientific publications and legislative regulation of the influence of electromagnetic fields on human body, highlight the role of standardization in this sphere and the ways of its development.

Keywords: electromagnetic safety, electromagnetic fields, standardization, International Electrotechnical Commission, IEC, Institute of Electrical and Electronics Engineers, IEEE, International Commission on Non-Ionizing Radiation Protection, ICNIRP, national goals.

Artem PROKHOROV, Elena KHUNUZIDI, Maxim ANANYEV, Anton LYADOV

NATIONAL AND INTERNATIONAL STANDARDIZATION OF FUEL CELL TECHNOLOGIES

Abstract. The authors conduct comparative analysis of standards for fuel cell technologies in domestic and foreign practice, determine the current state of national standardization in this area and identify possible ways of its development.

Keywords: standardization, quality management, International Electrotechnical Commission, IEC, International Organization for Standardization, ISO, technical committee, hydrogen fuel cell, HFC, fuel cell technology.

Maxim NEDZVETSKY, Valeriy YUSHMANOV, Alexander USHAKOV, Denis KURAKIN, Natalia KIREENKO

GAZPROM STANDARDIZATION SYSTEM: DEVELOPMENT IN CHANGING CONDITIONS

Abstract. The authors describe the key changes in approaches to implementing standardization processes formalized as part of reforming Gazprom Corporate Standardization System, as well as the obtained benefits and efficiency factors.

Keywords: corporate standardization system, organizational standards, intercorporate standards, matrix of complexes and documents of standardization system, standards tree, Gazprom.

Anatoly GOLOVASH, Natalya KURSHAKOVA, Vladimir POLEVAEV

TERMINOLOGY IN STANDARDS AND PRODUCT QUALITY: CAUSAL RELATIONSHIPS

Abstract. The authors substantiate the need to comply with terminology requirements in developing and updating standards and identify systemic logic violations in existing standardization documents.

Keywords: terminological standards, standards for terms and definitions, terminology requirements, quality of standards, logic.

Denis MIRONOV, Iosif ARONOV, Anna RYBAKOVA

PROCEDURES FOR DISTRIBUTION OF STANDARDS IN CIS COUNTRIES

Abstract. The authors present an overview of the procedures for distribution of national (state) standards applied in CIS countries and point out that in Russia these issues are not fully settled, which increases the risk of including unverified versions in the official document flow.

Keywords: legislation on standardization, national standard, publication, distribution, official document.

Yuriy BUDKIN, Sergey KURSAKOV, Ivan SERGEICHEV

EXPERIMENTAL DIGITAL PLATFORM FOR MATERIAL AND PRODUCT CERTIFICATION

Abstract. The authors present a methodology for implementing the results of scientific research into standards development and product certification based on virtual testing of digital material and product models obtained via advanced manufacturing technologies.

Keywords: standardization, certification, digital model, virtual testing, virtual test bench.

Sofia LEVANOVICH

SMART FORMAT: EASY WORK WITH DOCUMENTS

Abstract. The expert of Kodeks Consortium presents the solutions on business process digitalization that allow enterprises to improve their work with regulatory and technical documentation.

Keywords: regulatory and technical documents, technical documentation, work with documents, SMART format, Techexpert platform, Kodeks Consortium.

MEND YOUR SAILS WHILE THE WEATHER IS FINE: ADAPTING TO CLIMATE CHANGE

Abstract. For the first time in Russia, the national standard GOST R 70935-2023 “Adaptation to climate change. Guidelines for climate change resilience strategic planning” was enacted. It establishes methods for managing risks associated with abnormal changes in weather and temperature conditions. The standard entered into force on January 1, 2024.

Keywords: adaptation to climate change, resilience to climate change, risk management, strategy for adaptation to climate change.

THE KEY GOAL IS PERSONNEL SUPPORT OF QUALITY INFRASTRUCTURE

Abstract. Aleksandr Zazhigalkin, Rector of the Academy of Standardization, Metrology and Certification talks about the problems and tasks of additional professional education as an important tool for developing quality infrastructure and achieving technological sovereignty.

Keywords: education system, additional professional education, personnel deficiency, quality management, quality infrastructure, technological sovereignty.

Igor NIKOLAEV

MACROECONOMIC RISKS IN RUSSIA: A MEDIUM-TERM PERSPECTIVE

Abstract. The author examines the macroeconomic risks for Russia that have formed in recent years in robust sanction conditions, and points out the main threats that will slow down the pace of development in the medium term.

Keywords: macroeconomic risks, budget impulse, monetary policy, tax burden.

Dmitriy MASLOV, Tatiana LAVROVA

EQPA: THE EXCELLENCE MODEL FOR PUBLIC ADMINISTRATION in RUSSIA

Abstract. The authors propose a concept for the model of efficiency and quality of public administration (EQPA) based on the adapted methodology for organizational self-assessment via EFQM and CAF models as well as customer-centricity principals and standards, which are being implemented actively into the practice of government bodies.

Keywords: public administration, quality, client-centricity, excellence model, self-assessment.

Andrey KLOCHKOV

FMEA METHODOLOGY FOR RISK ANALYSIS IN AQM SYSTEM

Abstract. The author presents FMEA methodology, which is used for risk analysis in automated quality management (AQM) system and ensures the efficiency of processes throughout the product lifecycle at enterprises with high requirements for product reliability and safety.

Keywords: management, quality, reliability, risk analysis, AQM system, FMEA methodology, FMEA documents.

Stanislav KIM

AUTOMATION OF QUALITY MANAGEMENT SYSTEMS AND STANDARDIZATION PROCESSES: TRENDS, CHALLENGES, TECHNOLOGIES

Abstract. The author tells how to speed up the process of automating enterprise quality management system and conduct it with the least cost, describes the challenges faced by Russian companies with the departure of foreign software developers, and substantiates the need for the fastest possible development of domestic software for quality management.

Keywords: digitalization, automation of quality management systems, software, quality management.

Natalia NOVIKOVA

100 YEARS OF SCIENTIFIC AND TECHNICAL EDUCATION

Abstract. N.P. Novikova, Director of Scientific and Technical Library of the Ministry of Industry and Trade of the Russian Federation, describes the formation and activities of the library, which celebrates its 100th anniversary in 2024.

Keywords: scientific and technical library of the Ministry of Industry and Trade of Russia, scientific and technical information, management culture.

Tatiana ZVORYKINA, Nataliya KABALINSKAYA

MOBILITY IN URBANIZED REGION TERRITORY

Abstract. The authors describe current trends of mobility changes in an urbanized region and provide proposals for creating a set of standards to regulate it based on example of transport infrastructure.

Keywords: mobility, infrastructure, standardization, urbanization, region, development, innovation.

Marsel MINGALIEV, Oleg AKULICHEV, Sergey KOROLEV, Alla BERDUTINA

SOLVING QUALITY PROBLEMS IN THE OPERATION OF NEW CAR MODELS

Abstract. The authors study the problems of quality assurance for new car models that arise at the stages of testing and operation, provide ways to solve them, determine the sequence of actions and the functional composition of the participants in the process. The structure of data presentation and information flows generated in the process of solving problems has been developed. Practical recommendations are given for the design of an information system that allows real-time demonstration of measure implementing dynamics and eliminating the causes of inconsistencies.

Keywords: automotive industry, quality management, inconsistency, fault, data object, data structure, 8D method.